The Phoenix FireBird portable heater provides controlled electric heat for professional restoration and structural drying projects. In addition, its portable design allows technicians to add heat where cold conditions may slow the drying process.
Adjustable Heating Power
For example, the FireBird offers two operating levels. Low power provides 18,000 BTU using a 30A source, while high power provides up to 31,000 BTU using a minimum 50A source.
360 CFM Airflow
In addition, the heater provides airflow up to 360 CFM. As a result, technicians can move warm air through the drying area or use 12-inch flexible ducting to direct heat where needed.
Thermostat Control
For better control, a remote thermostat can monitor temperature within the drying space. For example, the heater can remain outside the affected area while ducting supplies heated air where needed.
Professional Drying Applications
For instance, the Phoenix FireBird can support several professional applications:
Water damage restoration
Structural drying
Cold basements
Construction and renovation areas
Temporary job-site heating
Safe Operation
Most importantly, always use the correct electrical supply and maintain proper airflow. In addition, follow the manufacturer’s operating instructions and keep the heater intake and outlet clear.
Phoenix Portable Heater
35 Pounds with 20,000 BTUS of safe heat. The Firebird Compact 20 is a powerful, portable, & safe heater providing instant heat exactly where you need it.
Phoenix Firebird Electric Heater Drying System
The Phoenix FireBird portable heater is built for performance and reliability. The Firebird portable, heavy duty electric heater features a built-in 50-amp twist lock receptacle designed to work with standard 30 or 50 amp power sources—select the setting using the HIGH/LOW switch.
At the 50-amp setting, the Firebird produces 31,000 BTU’s—that’s 360 CFM with a 80°F temperature rise. In an area with below freezing temperatures the Firebird can produce 360 CFM of air over 100 degrees. Using the 30-amp setting the Firebird produces 18,000 BTU’s—giving a 46°F temperature rise. Internal temperature cutouts prevent the Firebird from overheating an area, while the Firebird’s included remote thermostat provides a means to control the heat from anywhere in the drying space.
Listed by ETL to UL Safety Standards, NEC Compliant:
30 or 50 Amp operation (18,000 BTU/31,000 BTU):
30 Amp = 24 Actual Amp Draw and 46ºF Temperature Rise 50 Amp = 40 Actual Amp Draw and 80ºF Temperature Rise:
Two 8’ Power Cords (1 dryer, 1 range) included with unit:
Remote Thermostat (with 25’ connecting wire) included with unit:
Multiple air filter options Standard MERV-11, MERV-14:
Multiple ducting options 12” intake, 12” supply:
Detachable 12” Duct Collar stores in lid with room for power cords:
Stainless steel cabinet:
Technicians Review
Phoenix FireBird Specifications
Part Number: 4027300
Power: 220/240V AC
Low Power: 30A – 18,000 BTU
High Power: 50A – 31,000 BTU
Airflow: 360 CFM
Filter: MERV-11 pleated media
Ducting: 12-inch flexible duct compatible
Controls: High/Low power and thermostat operation
Technicians Review
Our technicians recommend the Phoenix FireBird portable heater for professional structural drying and restoration projects. Its adjustable heat, strong airflow, ducting options, and remote thermostat make it a practical choice when controlled supplemental heat is needed.
Phoenix FireBird Portable Heater Rental Toronto
Phoenix FireBird portable heater rental is available from GTA Restoration for structural drying, water damage restoration, renovation work, and temporary job-site heating throughout Toronto and the GTA.
In addition, this professional electric heater provides adjustable heat and strong airflow for colder drying environments. Therefore, technicians can use it with dehumidifiers and air movers when supplemental heat can support the drying setup.
Phoenix FireBird Portable Heater for Structural Drying
Because cold conditions can slow evaporation during water damage restoration, supplemental heat may help create better drying conditions. For this reason, the FireBird can form part of a properly planned restoration setup.
After a flood or plumbing loss, moisture can remain inside drywall, framing, flooring, and other materials. Meanwhile, dehumidifiers remove moisture from the air while air movers increase airflow across wet surfaces.
When appropriate, the FireBird can add controlled heat to support these drying conditions.
Phoenix FireBird Portable Heater Specifications
Part Number: 4027300
Power: 220/240V AC
Low Power: 30A source – 18,000 BTU
High Power: 50A source – up to 31,000 BTU
Airflow: approximately 360 CFM
Filter: MERV-11 pleated media
Ducting: 12-inch flexible duct compatible
Controls: High/Low power and remote thermostat
Phoenix FireBird Equipment & Operating Information
Because the FireBird supports 12-inch flexible ducting at the inlet or outlet, technicians can direct heated air into suitable drying areas. As a result, the heater can remain positioned where proper operation is maintained.
Remote Thermostat Control
For example, a remote thermostat can monitor conditions within the heated area while the FireBird remains outside a drying chamber. Therefore, technicians have greater flexibility when controlling the drying environment.
Drying Heater Rental with Dehumidifiers & Air Movers
For instance, the FireBird adds heat while dehumidifiers remove moisture from the air. Meanwhile, air movers increase airflow across wet materials.
In addition, combining suitable equipment can support a more complete drying setup. As a result, technicians can adjust heat, humidity, and airflow according to job-site conditions.
Phoenix FireBird Safety & Operating Information
Most importantly, always follow the manufacturer’s electrical, ducting, airflow, and operating instructions. In addition, keep the heater intake and outlet clear during operation.
Phoenix FireBird Portable Heater Toronto & GTA
Finally, contact GTA Restoration when you need a Phoenix FireBird portable heater for structural drying or temporary heating in Toronto and the GTA. Then, tell us about the work area and available electrical supply so we can help you choose suitable equipment.
The Phoenix FireBird portable heater provides controlled electric heat for restoration, structural drying, and temporary job-site heating. Therefore, GTA Restoration rents this equipment for suitable projects throughout Toronto and the GTA.
Phoenix FireBird Heater for Structural Drying
Cold temperatures can slow drying after water damage. For this reason, supplemental heat may support drying when project conditions require it.
Phoenix FireBird Portable Heater Output
The FireBird offers two power levels. For example, low power provides approximately 18,000 BTU. Meanwhile, high power can provide up to 31,000 BTU with the correct electrical source.
360 CFM Airflow
The heater moves up to approximately 360 CFM of air. As a result, warm air can circulate through the drying area or suitable ducting.
Portable Heater Rental for Water Damage
Professional drying often uses several types of equipment. For instance, air movers increase airflow while dehumidifiers remove moisture. In addition, supplemental heat may support colder drying environments.
Drying Heater Rental for Cold Basements
Basements and other cool areas can be difficult to dry. Therefore, added heat may support restoration work when technicians properly control temperature and airflow.
Temporary Job-Site Heating
The FireBird can provide temporary electric heat during restoration, construction, and renovation work. However, the available electrical supply must meet the heater’s requirements.
30A & 50A Power Options
Low-power operation uses a suitable 30A source. In contrast, high-power operation requires a minimum 50A source.
Flexible Ducting
The heater supports 12-inch flexible ducting. Therefore, technicians can direct warm air toward suitable drying areas.
Remote Thermostat Control
The remote thermostat helps control the heated space. For example, technicians can position the thermostat inside a drying area while the heater remains outside.
Using Heat with Dehumidifiers
A dehumidifier removes moisture from the air. Meanwhile, air movers increase airflow and the FireBird provides supplemental heat when appropriate.
Professional Restoration Applications
The FireBird can support structural drying, water damage restoration, renovation projects, and temporary heating. In addition, ducting can help direct heated air where needed.
Safe Heater Operation
Proper power, airflow, ducting, and equipment placement are important. Therefore, always follow the manufacturer’s operating instructions and keep airflow unrestricted.
Related Restoration Equipment
In addition, GTA Restoration rents dehumidifiers, air movers, air scrubbers, and other professional restoration equipment. As a result, customers can select equipment according to project conditions.
Phoenix FireBird Portable Heater Toronto
Finally, contact GTA Restoration for Phoenix FireBird portable heater rental in Toronto and the GTA. Then, tell us about the work area, drying conditions, and available power so we can help you choose suitable equipment.
Need professional heating or drying equipment?
Nationwide, Local Pricing
GTA Restoration offers local flood & water damage repair, mold removal/remediation, asbestos removal/abatement, fire/smoke damage repair services and much more.
The Phoenix FireBird is a professional electric heater used for restoration, structural drying, and temporary heating. In addition, it can support suitable cold-area drying projects.
How much heat does the FireBird provide?
Low-power operation provides approximately 18,000 BTU. Meanwhile, high-power operation can provide up to 31,000 BTU.
What electrical supply does the heater need?
The FireBird requires 220/240V AC. In addition, low power uses a suitable 30A source while high power requires at least 50A.
How much airflow does it provide?
The FireBird provides approximately 360 CFM of airflow. As a result, heated air can move effectively through suitable drying areas.
Can I connect flexible ducting?
Yes. For example, 12-inch flexible ducting can direct heated air into suitable drying areas.
Can I use the FireBird for water damage drying?
Yes. When appropriate, supplemental heat can support a professional structural drying setup.
Does it work with dehumidifiers?
Yes. For instance, dehumidifiers remove moisture while air movers increase airflow and the FireBird provides supplemental heat.
Does the FireBird have thermostat control?
Yes. Therefore, technicians can use the remote thermostat to control heat based on conditions within the drying area.
Where is this heater commonly used?
Common applications include basements, restoration sites, drying areas, and renovation projects. In addition, the heater can provide temporary job-site heat when suitable power is available.
Where can I rent a Phoenix FireBird portable heater?
Finally, GTA Restoration provides Phoenix FireBird portable heater rental equipment for suitable projects throughout Toronto and the GTA.
