Floor drying mats provide targeted drying for water-damaged hardwood floors. The Dri-Eaz Rescue Mat System works with compatible equipment to draw moisture from affected flooring. As a result, restoration crews can focus drying on specific wet areas.
The Dri-Eaz Rescue Mat System provides a practical setup for targeted hardwood floor drying. Instead of taping each mat to the floor, gasket edges help create a seal. In addition, each mat uses a single hose connection, which simplifies installation and reduces unnecessary connections.
The system can accommodate affected floor areas of different sizes. Each kit includes six mats in two sizes and three sections of 7-foot hose. Therefore, crews can arrange the mats according to the affected flooring and project conditions. Moreover, the modular design makes it easier to adjust the setup as drying progresses.
In addition, the Dri-Eaz F286 Rescue Mat System works with other Dri-Eaz equipment to help dry wet hardwood floors quickly and efficiently.
The complete Rescue Mat System includes floor drying mats as a key component:
Note: The Rescue Mat System does not include the compatible extraction or air-moving equipment. Therefore, arrange the required Dri-Eaz equipment separately when needed.
Call GTA Restoration for a quote on Water-Damaged Wood Floor Drying Mats.
The Rescue Mat System helps remove trapped moisture from water-damaged hardwood flooring. First, position the mats over the affected floor area and connect them to the appropriate drying equipment. Then, the system draws moisture from beneath the floor surface. As a result, restoration professionals can target moisture within hardwood flooring without immediately removing the entire floor.
The Dri-Eaz F286 Rescue Mat System works with the Dri-Eaz Air Wolf and DriForce air movers or a conventional truck-mounted extractor. First, remove any standing water from the affected area. Then, connect the Rescue Mat System to the appropriate equipment to draw trapped moisture from the hardwood floor.
Floor drying mats rental is available from GTA Restoration for targeted drying of water-damaged hardwood floors throughout Toronto and the GTA. The Dri-Eaz Rescue Mat System helps restoration crews focus drying directly on affected flooring.
In particular, the system uses drying mats, hoses, and compatible extraction equipment to remove moisture from hardwood flooring. As a result, crews can target wet sections without relying only on general room drying.
Water can move beneath hardwood flooring and become difficult to remove with surface drying alone. Therefore, floor drying mats can provide a more targeted approach when project conditions allow.
For additional equipment options, visit our restoration equipment rental page.
The Dri-Eaz Rescue Mat System uses mats placed over affected hardwood flooring. Then, compatible equipment creates airflow through the system to support moisture removal from the floor assembly.
For manufacturer information, visit the Legend Brands / Dri-Eaz website.
In addition, compatible extraction or blower equipment is required to operate the drying system and may be supplied separately.
For example, crews can arrange the different mat sizes over specific wet sections of hardwood flooring. Therefore, the setup can focus on affected areas rather than treating the entire floor in the same way.
The system’s different mat sizes allow crews to adjust the configuration to the affected area. Moreover, the hose sections make it easier to position the equipment according to room layout and site conditions.
Most importantly, crews should first stop or control the water source. They should also assess the flooring and surrounding materials before beginning the drying process.
Meanwhile, dehumidifiers and air movers may support the overall structural drying process. Depending on the project, crews can combine the Rescue Mat System with a low grain dehumidifier or high speed air mover.
However, drying results depend on the flooring construction, moisture level, water exposure, equipment setup, and condition of the affected materials. For this reason, crews should monitor moisture conditions throughout the drying process.
Finally, contact GTA Restoration when you need floor drying mats for a water-damaged hardwood floor in Toronto or the GTA. Tell us about the affected flooring and project conditions so we can help determine suitable rental equipment.
Small Desiccant Dehumidifier | ⭐⭐⭐⭐⭐ Top 5 Emergency Roof Repair Services in the GTA | Commercial Dehumidifier Rental Review | Repair or Replace Wet Flooring? | Top Causes of Condo Water Damage and What to Do | Mold Remediation Timeline: How Long It Takes
Floor drying mats provide targeted drying for water-damaged hardwood flooring. Therefore, GTA Restoration rents the Dri-Eaz Rescue Mat System for suitable water damage and structural drying projects throughout Toronto and the GTA.
After a leak or flood, moisture can move between boards and into the flooring assembly. As a result, the visible surface may not show the full extent of the moisture.
For this reason, restoration crews can place drying mats directly over affected areas. The system focuses drying on the wet flooring while other equipment manages surrounding moisture conditions.
The Dri-Eaz Rescue Mat System includes mats in two sizes. Therefore, crews can arrange the equipment around different floor layouts and affected areas.
In particular, the kit includes four large mats measuring approximately 46 × 30 inches. These mats help cover larger sections of affected hardwood flooring.
In addition, the kit includes two medium mats measuring approximately 23 × 30 inches. Their smaller size provides more flexibility when crews need to target limited areas.
The kit also includes three approximately 7-foot hose sections, along with the required connectors and cuffs. As a result, crews can configure the mat system according to the treatment area and equipment position.
Meanwhile, gasket material helps create the required seal between the drying mats and flooring. This setup supports targeted airflow through the system.
Importantly, the Rescue Mat kit requires compatible extraction or blower equipment for operation. Therefore, crews should confirm the complete equipment setup before starting the drying process.
In addition, a dehumidifier may help manage moisture released into the surrounding air during structural drying. For example, larger water damage projects may require both targeted floor drying and room dehumidification.
Similarly, air movers may support drying of other affected surfaces and materials. However, equipment placement should match the actual moisture conditions and drying plan.
During drying, crews should monitor moisture conditions in the affected flooring and surrounding materials. Then, they can adjust the equipment setup as conditions change.
Before drying, inspect the affected flooring for damage, movement, contamination, and other conditions that may affect restoration. For this reason, not every water-damaged floor will be suitable for drying in place.
Most importantly, floor drying equipment does not replace cleaning or removal when contamination affects the flooring. Instead, crews should follow the appropriate restoration procedures for the water category and affected materials.
Depending on the project, the drying setup may include floor mats, dehumidifiers, air movers, and other restoration equipment. Therefore, equipment selection should reflect the moisture level, affected area, flooring construction, and site conditions.
Finally, GTA Restoration provides floor drying mats rental for suitable hardwood floor drying projects throughout Toronto and the GTA. Contact us to discuss the affected area and equipment requirements.
Need hardwood floor drying equipment?
Nationwide, Local Pricing
GTA Restoration offers local flood & water damage repair, mold removal/remediation, asbestos removal/abatement, fire/smoke damage repair services and much more.
Search
Floor drying mats provide targeted drying for suitable water-damaged hardwood flooring.
In particular, the Rescue Mat System uses mats, hoses, seals, and compatible equipment to support targeted hardwood floor drying.
The kit includes six mats: four large mats and two medium mats.
According to the equipment specifications, the four large mats measure approximately 46 × 30 inches each.
Meanwhile, the two medium mats measure approximately 23 × 30 inches each.
Yes. The system includes three hose sections measuring approximately 7 feet each.
Yes. Compatible extraction or blower equipment is required to operate the floor drying system.
For suitable projects, restoration crews can use the mats to target moisture in water-damaged hardwood flooring.
Yes. The two mat sizes allow crews to configure the system around different affected floor areas.
No. Depending on the project, dehumidifiers may also be required to control moisture in the surrounding air.
Yes. Air movers may support drying of other affected surfaces when the project requires additional airflow.
Yes. Crews should monitor moisture conditions throughout the drying process and adjust the setup when necessary.
No. The flooring condition, contamination, moisture exposure, construction, and other site factors determine whether drying in place is appropriate.
Finally, GTA Restoration provides floor drying mats rental for suitable hardwood floor drying projects throughout Toronto and the GTA.
We Work Direct with All Insurance Companies
Wᴇ ᴀʀᴇ ᴄᴏᴍᴍɪᴛᴛᴇᴅ ᴏɴ ᴡᴏʀᴋɪɴɢ ᴡɪᴛʜ ᴇᴠᴇʀʏ ɪɴsᴜʀᴀɴᴄᴇ ᴄᴏᴍᴘᴀɴʏ ᴀᴄʀᴏss Cᴀɴᴀᴅᴀ & USA.
Learn more ↴
RELATED ARTICLES
Emergency? Immediate response 24/7
We cover all GTA 24/7.
Head Office:
250 Consumers Rd,
#10
Toronto, ON
M2J 4V6,
Open 24 hours
Downtown Office:
1 Toronto St,
#10
Toronto, ON
M5W 1A1,
Open 24 hours
For non-emergencies use our contact form
Not sure what you need?
Call us today to find the best product for your situation.
Head Office:
101 Lebovic Ave,
Unit #10
Scarborough,
ON, M1L 4T7
Hours
24-Hours Open
Downtown Office:
250 Yonge Street,
Unit #1A
Toronto,
ON, M5B 2L7
Hours
24-Hours Open
Floor Drying Mats
Get a quote today